Upon arrive to undertake the Limestone floor refurbishment is was obvious that the Limestone throughout the ground floor had lost its shine & protective layer.
To start the Limestone floor refurbishment, we started by removing the dirt, grime & remains of the original seal and deep cleaned the stone & grout.
This Limestone floor and grout had suffered a small area of etching damage from a oven cleaner spill. We started by removing the spoiled stone, neutralised the acid, then honed & polished the etching so that it blended with the surrounding floor tiles.
The next stage of the process is to apply a sealer into the stone and grout which enables the floor to become water repellent once again. The final stage in process was to apply a low shine polish which enabled the natural features of the limestone floor to be brought out.